Early Black Friday: 15% off everything. Free worldwide shipping over $95. 20,000+ customers. 1-year warranty. Fits every Apple Watch.

HOME  / HELP  / RESIZING
Resizing · Got your band?

Make it fit
your wrist.

Every band adjusts to your wrist, and how depends on the style. Find your band’s name below — or open the Resizing section on its product page, which links straight to the right method. Any tool your band needs comes with it.

01 · Wheel pin tool (included)

Push pins

Each link is held by a pin you push out with the wheel tool.

  1. Look for small arrows on the inside of the band. Pins come out in the direction they point.
  2. No arrows? Look at the pin itself: push on the rounded head so it comes out from the split end.
  3. Unscrew the tool’s wheel to open it up.
  4. Set the band in the tool so the needle lines up with the pin hole.
  5. Spin the wheel until the pin pops out, then take out as many links as you need.
  6. Join the band’s ends and push the pin back in, rounded head first.
  7. Close the clasp.
02 · No tools needed

By hand

The links unhook with your fingers. No tools needed.

  1. Find the small clasp between two links and open it. It only opens from one side, so if it won’t move, try the other.
  2. Unhook the link and set it aside.
  3. Repeat until the band fits your wrist.
  4. Reattach the band and close the clasp.
03 · Pry tool (included)

Sliding clasp

The clasp slides along the band. The pry tool unlocks it and locks it again.

  1. Open the clasp so the band comes apart in two.
  2. Put the tool’s tip into the small hole by the arrow and lever the clasp open.
  3. Slide the clasp along the band to the length you want.
  4. Lock it again: put the tip into the hole and push toward the arrow.
  5. Reattach the band and close the clasp.
BANDS THAT RESIZE THIS WAY
04 · Wheel pin tool (included)

Spring pins

Tiny spring-loaded pins, released with the needle end of the wheel tool.

  1. Work over a soft cloth. The pins are tiny and easy to lose.
  2. Find the end of the spring pin in the side of the link.
  3. Press it in with the tool’s needle end and ease the links apart.
  4. Remove links until the band fits.
  5. To rejoin, seat one end of the pin, press the other end in with the needle, and bring the links together until it clicks into place.
BANDS THAT RESIZE THIS WAY
05 · No tools needed

Buckle, magnet or slider

There are no links to take out. Just set it where it feels right.

  1. Buckle bands: fasten on the hole that feels right, like any watch strap.
  2. Magnetic bands: wrap the strap around and let the magnet catch wherever it’s comfortable. There are no holes, so any point works.
  3. Slider bands: press the button on the clasp and slide it along until the band fits.
Putting it on

Swap bands in thirty seconds.

The connector is built into the band, sized to your Apple Watch case — no tools, no adapters.

01

Press release

Hold the small band-release button on the back of your watch.

02

Slide it out

Slide the old band sideways out of the channel while you hold the button.

03

Click it in

Slide the OMB band in the same way until it clicks. Done.

✦   STUCK?

We’ll talk you through it.

Email your order number and we’ll walk you through resizing — usually within one working day, and always within three.